Ink ribbon is more familiar kind of printing supplies

Ink ribbon is more familiar kind of printing supplies. From the earliest mechanical percussive English printer dot matrix printer to a computer later, all using the ribbon. Working principle is to use the English typewriter or firing pin dot matrix printer head inside the letters hit pieces to hit print ribbons, printing paper produced in printing. Ribbon composed of very simple, nylon ribbon roll is a nylon fiber as raw material woven tape substrate through the ink soaked, made after staining

Oki printer ribbons

Because oki printer ribbons  and many manufacturers, as in the dot matrix printer ribbon, the use of the structure of "Möbius band", is to a ribbon joints, rotate 180 degrees, even in together. Such an end to think even the ribbon, the ribbon length of the actual use of doubling the length of the ribbon used originally unilateral, bilateral become used ribbon. Thereby increasing the life, this is the famous "Mobius loop" Year 1858, Mobius found: 180 ° twist to a two bonded to a piece of paper and then, with the magic of nature. Take a long white piece of paper, painted black on one side, then turn over the one end, along with scissors to cut the tape central to it. You will be surprised to find that not only did the tape into two parts, but as a figure twice as long as the cut paper circle! Interesting: newly obtained this longer paper circle, itself is a double-sided surface, its two border itself, though not tied, but mutually nested together.

How to replace the citizen printer ribbon

How to replace the citizen printer ribbon, in fact, to replace the print ribbon is not too difficult: First, open the printer cover, will see a clip shaped like a black box, we call it the ribbon cartridge, it is placed in the middle part empty is the print head. Remove the print frame, when attention apart from the print head near the end of the line to pull up, the print frame can easily unloaded. Then you can open the print frame, to observe the primary color bands around the law, otherwise the ribbon is most likely not rotate properly and cause print failure. Note Printing rack gear to be sandwiched between two ribbons, and should be parallel with them, otherwise it will lead to the occurrence of the ribbon with the rotation of the gear shift, and finally jammed the gear can not be rotated. After the ribbon installed, the print rack-mounted back in place, the program can replace the ribbon finished.

Thermal printing ribbon printer is printer supplies

Thermal printing ribbon printer is printer supplies, is on the side of a base coated with wax, resin or mixed ink polyester or other high density film. In the absence of ink coated on one side with a lubricant to prevent wear and damage to the print head, a common shaft core Nylon ribbon roll with paper and plastic two, the main requirement is not deformation and not in print slide. Common with wax based, ash mixed base, resin based several. At present, our domestic, use ribbon are common date code Tandai, infusion bag ribbon, washing cloth, special resin ribbon cable with ribbon, barcode fax ribbon , wax - ribbons, mixed base - ribbon, ribbon and other kinds of resin matrix - type. Different materials and varieties of ribbon / ribbon for printing materials and printers have different applicable in the ribbon / thermal transfer ribbon technology, printer performance is the primary.