Identification ribbon

To identify the level of quality ribbon mainly from tape-based, joint welds and ink three.
With base

star printer ribbontape substrate is woven nylon fiber as raw material, its quality directly affects the poor adhesion of the ink ribbon life and penetration. On the use of market-based band is divided into nylon 6 and nylon 66, the difference lies in the different chemical composition of nylon. Nylon 66 is better than nylon 6 elastic, durable resistance to fight. Nylon 66 is divided into a low density, the higher the density, high-density and high-density four twisting, density, warp and weave a few more elastic as possible. Preferred ribbon is generally used in high-density nylon 66 woven, warp and weft density of more than 130 lines per centimeter, fiber state no winding, lint-free, non-deformable high density tape substrate.
Ink

Good ink small particles will not clog pinholes, good liquidity, PH value even when inking strong adsorption moisture is good, durable color transition play and print slowly. The quality of the ink ribbon is through a degreasing treatment, hand to touch when the process will not leave the ink obvious traces of ink this ink is very uniform on the finger, and after the printing effect is not obvious difference.
Interface

Good flat ribbon interfaces were thin, the error is relatively small, the degree of hardening is very light, when the printing is not linked to needle; greater seam strength, tensile strength is also strong. Ribbon quality welds are welded using ultrasonic waves, it is possible to effectively guarantee the quality of the joint, and using a simple hot pressing method or a hot-melt seam welding are varying degrees of damage of the fiber properties with the group, resulting in welding was protruding joints will show a double header, and the interface is very smooth, which is often used print ribbon pin can not be returned, so badly worn, damaged or broken print needle, so the purchase should be carefully observed ribbon case the joint weld

Each printer is equipped with only one universal printer print head, in large-scale applications, often with higher performance of a line printer, also known as "shuttle" or "comb" type printer. It is the more (for example, 44 or more) of the print pin mounted transversely in a row comb plate, so that each needle only responsible for one line print job a few characters, comb plate (with all print pin) reciprocate about sports, when a needle reaches the position a little to be printed through to its solenoid coil to provide a pulse current to make it a point to complete the printing operation. Combs each completed a move to the left or right, on the printing paper to print out all the information on the complete line of a dot matrix, and then control the printing paper to move away from a printing point by the paper feed mechanism, you can start the next line of dot matrix printing process information

Ribbon Works

Ribbon Works
ribbon is more familiar kind of printing supplies. From the earliest mechanical percussive English printer dot matrix printer later, all using the #ribbon. ribbon works by firing pin dot matrix printer or use English typewriter letters inside the nose hit pieces to hit print #ribbons, printing paper produced in printing.
star printer ribbon composed of very simple, is to nylon fiber as raw material woven tape substrate through the ink soaked, stained steel. Good #ribbon, tape substrate should be durable to play, stretch, long-time print lint, continuous line, can not afford lotus leaf edge. Its performance is mainly flat with a base surface, no protruding fiber knot, warp and weft density homogeneous tight, cutting edge straight and uniform, no Jiaohu phenomenon. Touch: good band based soft and delicate, there is a smooth feeling. Pull the elastic good, recovery is good. Bad break spinning #ribbon group badly, when touch feel stiff, cutting edge uneven, badly scorched band edge, pull the elastic small, poor recovery, print often entrainment, easy to play the lotus leaf, produce blocking needle , cassette and so on.

Matters needing attention when stylus printer ribbon printing

And one more thing need to remind you pay attention to the printing frame is built-in two gear must be the ribbon with, but also to ensure that keep parallel with them, or else gear to move the TEC printer ribbons  ill move to the ribbon shift phenomenon, finally will jam the gear to the normal ribbon cannot be turned. When, in accordance with the above method after the ribbon is installed, we must also be in accordance with the original installation method will print reinstall back to printer, finally will be the top of the printer cover again in situ, so the ribbon change process even over.
Printing ribbon is not installed, replace, can ensure ideal printing effect, we must be the same with toner or cartridge protection to protect the good ribbon, to both improve the print quality and prolonging the service life of the ribbon. Of course, to protect the PRINTRONIX printer ribbons   some appropriate skills must be mastered, it's not some details of the following skills, will make everyone get it!
To familiar with the paper thickness regulator, to ensure that the print head and the distance from the surface of the printing paper always are in the right. Under normal circumstances, when the printer is using a new ribbon, that we can by adjusting the thickness of the paper regulator, the distance to the print head and paper surface slightly widened, so that you can avoid printed handwriting effect is too strong, which can effectively ensure the quality of printing; If printing ribbon, have been used for a long time, and print the current page text seems to have less clear than before, so we can try to adjust the paper thickness regulator, the distance to the print head and paper surface slightly closer and so can the ribbon "potential" dig out as much as possible. Under normal circumstances, we are adjusting the paper thickness regulator, should be to ensure that the printing effect can meet our needs under the premise of fully follow the principle of can is big.

Printing ribbon not only can not work normally

Compared with laser printers and inkjet printers, stylus printer appearance looks hard, but it also like other types of printers, "tired" excessive is easy to "sick", once "sick" common people also don't know how to deal with, especially those who just "new man", to be going to work on the use and maintenance of stylus printer is poorly understood. In order to help you efficiently with good stylus printer, at the same time avoid printer "sick", this article will start from some details below, to use and maintenance of stylus printer once again looking back, hoping to bring some harvest of the "new man"!
Like toner and ink cartridge, OLIVETTI printer ribbon  s also belongs to a kind of printing consumable, but it only belongs to the stylus printer proprietary; Usually every once in a while, we all need to replace ribbon. Although change printing ribbon is not a very difficult thing, but the type of print is different, ribbon rack installation results is not identical also, fortunately all the working principle of ribbon is almost consistent. Under normal circumstances, when we set off the top of the printer cover, we can see there is a clip in the shape of a black box, it is printing, we often mentioned is installed in the printing frame is in the middle of the pin type print head. Before installing the printing epson printer ribbon dfx8000/5000   we need to uninstall down through the printer will print, when unloading the equipment, must first from near the location of the print head forcibly pull up, easily from the printer to print it frame down; Below, we also need to open the printing frame, considering the type of printer to print an installation structure of it is not exactly the same, so the installation of ribbon winding method is not identical also, before we take primary unload down, must look at the ribbon well before the correct winding, otherwise not in accordance with the correct way to install printing ribbon not only can not work normally, the opposite and may lead to the printer won't work.

The application field of the thermal transfer ribbon and the principle of work

Thermal transfer ribbon is a very wide range of uses, the amount is very huge products. With the development of information technology in China and rapid development of computer application domain unceasing expansion and in-depth, people of high speed, high quality output print on demand is more and more big, and the traditional way of printing market in terms of price, printing quality, printing speed is difficult to meet the user needs in all directions. Thermal Compatible epson printer ribbons made of high strength thin films due to the high concentration and ink, and the use of single use mode, so the printing characters of high quality, long service life and overcome the ribbon, inkjet feathering, easily soluble in water and other defects, thermal transfer printing method to print medium without any requirements, can be in plain paper, recycled paper, wax paper, ordinary film, envelopes, paper label until the cloth to achieve high clear print.

热转印成像方法是1953年Mille发明的，伴随着微电子技术、光刻技术、半导体电热元件技术以及激光技术的发展，尤其是高敏性的热转印成像功能材料技术的发展，热转印打印机作为一种非接触式打印的计算机外设硬输出设备，已成为市场占有率很高的一类特种打印机。其成像的热力学原理是通过计算机信号驱动半导体电热头或激光将热量传递到支持体的成像材料上，使成像材料热熔融而转移到受像介质上形成文字和图象。热转印成像材料涂布在带基上，称之为热转印碳带或热转印色带。

Thermal transfer imaging method was invented by Mille in 1953, along with the development of microelectronic technology, lithography technology, the semiconductor electric heating element technology and laser technology, especially the development of high sensitivity thermal transfer imaging functional material technology, thermal transfer printer as a non-contact printing computer peripherals hard output devices, has become a market share special kind of printer of high rate. The imaging principle of thermodynamics is heat transfer to the imaging material support body through computer signals to drive the semiconductor electrothermal head or laser imaging materials, make hot melt and transferred to the text and image by image forming medium. Thermal transfer imaging material is coated on the base tape, called thermal fax ribbon or thermal transfer ribbon.