Printer ribbons composition

printer ribbon composed of very simple, is to nylon fiber as raw material woven tape substrate through the ink soaked, stained steel. Good ribbon, tape substrate should be durable to play, stretch, long-time print lint, continuous line, can not afford lotus leaf edge. Its performance is mainly flat with a base surface, no protruding fiber knot, warp and weft density homogeneous tight, cutting edge straight and uniform, no Jiaohu phenomenon. Touch: good band based soft and delicate, there is a smooth feeling. Pull the elastic good, recovery is good. Bad break spinning ribbon group badly, when touch feel stiff, cutting edge uneven, badly scorched band edge, pull the elastic small, poor recovery, print often entrainment, easy to play the lotus leaf, produce blocking needle , cassette and so on.

Each printer is equipped with only one universal printer print head, in large-scale applications, often with higher performance of a line printer, also known as "shuttle" or "comb" type printer. It is the more (for example, 44 or more) of the print pin mounted transversely in a row comb plate, so that each needle only responsible for one line print job a few characters, comb plate (with all print pin) reciprocate about sports, when a needle reaches the position a little to be printed through to its solenoid coil to provide a pulse current to make it a point to complete the printing operation. Combs each completed a move to the left or right, on the printing paper to print out all the information on the complete line of a dot matrix, and then control the printing paper to move away from a printing point by the paper feed mechanism, you can start the next line of dot matrix printing process information

The technical index of the thermal transfer ribbon

A, transfer refers to the ink ribbon layer transfer to the percentage of the print medium, ink layer whether 100% fully heat transfer to the print media (plastic, paper, composite film and other material), transfer percent much ink.

b、附着力 指油墨层打印到打印介质（塑料、纸张、复合薄膜等材料）上附着牢度和耐磨擦度。

B, adhesion refers to ink layer print to print media (plastic, paper, composite film and other material) on adhesion fastness and abrasion degree.

c、清晰度 指油墨层热转移到打印介质上，打印出的内容清晰程度，是否美观。

C, definition refers to the ink layer heat transfer to the printing medium, print out the text clear degree, whether or not beautiful.

d、适应性 指热转印色带能否在各种介质（塑料、纸张、复合薄膜等材料）和生产环境（蒸煮、冷冻等情况）中打印，打印效果能否满足客户的要求。

D, adaptive to thermal TEC printer ribbons can be in various media (plastic, paper, composite films and other materials) and the production environment (cooking, freezing etc.) in printing, the printing effect can meet the requirements of customers.

e、温度 指热转印色带在使用过程中的温度，热转印色带特性不同造成在实际使用中温度是不相同的，在不同温度中打印效果也是不同，只有打印效果最佳，温度才是最佳的。

E, temperature of thermal transfer ink ribbon in the use of process temperature, thermal fabric ribbon printer characteristics of different causes in actual use temperature is not the same, in different temperature printing effect is also different, only the best printing results, temperature is the best.

Thermal transfer ribbon introduction

Thermal transfer ribbon called hot foil stamping ribbon, referred to as the ribbon, English is Thermal Transfer Ribbon.

热烫印色带是打印机耗材，就是在一面涂上蜡基、树脂基或混合的油墨的聚脂或其它高密度薄膜。在没有油墨的一面涂上润滑剂以防止打印头的磨损和损坏，碳带的轴芯常见的有纸质和塑料两种，主要要求是不能变形和在打印时不能滑动。常见的色带有蜡基、蜡树混合基、树脂基几种。目前我们国内，使用色带常见的有日期打码碳带、输液袋碳带、水洗布专用树脂碳带、电缆用碳带、条码碳带、蜡基-色带、混合基-色带、树脂基-色带等各类型号。不同材质与品种的色带/碳带对于打印材料与打印机都有不同的适用，在色带/碳带热转印技术中，打印机的性能是首要的。

Thermal printing ribbon printer is printer supplies, is on the side of a base coated with wax, resin or mixed ink polyester or other high density film. In the absence of ink coated on one side with a lubricant to prevent wear and damage to the print head, a common shaft core Nylon ribbon roll with paper and plastic two, the main requirement is not deformation and not in print slide. Common with wax based, ash mixed base, resin based several. At present, our domestic, use ribbon are common date code Tandai, infusion bag ribbon, washing cloth, special resin ribbon cable with ribbon, barcode fax ribbon , wax - ribbons, mixed base - ribbon, ribbon and other kinds of resin matrix - type. Different materials and varieties of ribbon / ribbon for printing materials and printers have different applicable in the ribbon / thermal transfer ribbon technology, printer performance is the primary.